Tips To Keep Your Sump Pump Running Smoothly
During the average week, you probably don’t give your sump pump much thought. When a heavy rainstorm hits in Philadelphia, PA, however, it’s one of the first things you worry about. Since it is critical that your pump works when you need it, it’s a good idea to conduct some routine pump maintenance to keep it in tip-top condition.
How a Sump Works
The sump pump has a few main components that work together to pump water out of your home.
The groundwater collection system works by collecting the outside water through drain tiles and rocks placed under the soil along the house’s foundation. As the groundwater collects, it flows down through pipes to the basement and into the sump tank through an intake screen.
The sump tank is an appliance that is installed inside a specially-made pit placed in the lowest area of the basement. When water reaches a certain level in the tank, a float device will activate a pump.
The pump then forces the water out through a discharge pipe to the outlet drain outside, away from the house. When the water has been drained to a certain level in the tank, this triggers the device to shut off the pump.
What To Inspect
Since the sump mechanism can sit for a few weeks or even months without being activated, it should be inspected periodically. Every 2 or 3 months you should check to make sure the power cord is connected properly. Then dump a bucket of water into the tank to ensure the float device and pump do their job correctly.
At least once a year, you should conduct in-depth maintenance on the unit. Remove any debris from the discharge pipe and intake screen to prevent clogs. Also, clean out the pit area to ensure the unit will function properly. If applicable, replace the backup battery every 2 years.
Give your sump pump a little tender loving care so that it works when you need it most.